- INFORM
- Няма Наличност
Няма Наличност
* - Стоката е в склад на официалния вносител на марката за България. Времето за доставка е обикновено от 1 до 3 работни дни. Възможно е към момента на завършване на поръчката, продукта да е вече изчерпан. В случай на изчерпана наличност ще се свържем с Вас
Input
Phase Configuration: 1Ph + N + PE (Hardwire)
Nominal Voltage: 220VAC/230VAC/240VAC
Minimum Voltage (at Half load): 160VAC
Minimum Voltage (at Full load): 180VAC
Maximum Voltage: 280VAC
Frequency: 45-65 Hz
Power Factor:0.99.
Output
Power Factor: 0,9
Phase Configuration: 1Ph + N + PE (Hardwire)
Nominal Voltage: 220VAC / 230VAC / 240VAC
Wave Form Pure: Sine Wave
Total Harmonic Distortion: at 100% linear load: <3% and at 100% non-linear load: <5%
Frequency: 50Hz or 60Hz (adjustable)
Frequency Tolerance(free running): ±0,1 %
Frequency Synchronized Range: ±1Hz, ±3Hz (selectable)
Static Voltage Regulation (0%-100% load): <1%
Crest Factor: 3
Transfer Time: 0sec
Overload: Up to 10min. @100%~120%, Up to 1min. @120%~150%, Transfer to bypass @ >150%
Total Efficiency: up to 90%
Greenmode efficiency: ≥97%
Outlets: External Socket Box (2 pcs SCHUKO, 4 pcs IEC C13 Outlets) Optional.
Display
LED + LCD Display: Line Mode, Backup Mode, ECO Mode, Bypass Supply, Battery Low, Battery Bad/Disconnect, Overload and Transferring with Interruption & UPS Fault
LCD display: Input Voltage, Input Frequency, Output Voltage, Output Current, Output Frequency, Load Percentage, Battery Voltage & Inner Temperature
Self Diagnostics: Upon Power-on, Front Panel Setting & Software Control, 24-hour routine checking.
Battery
Type: Maintenance-free lead acid batteries
Recharge Time: 4-6h up to 90%
Voltage: 240VDC
Quantity per string: 20 pcs 12V Batteries
Internal batteries: 20 pcs 12V 4.5Ah (internal battery version only)
Cold Start: Present .
Environment
Overload Protection: Bypass transfer time is calculated by simulating a temperature related model of a fuse
Short Circuit Protection: Acts as the ideal current source during the short circuit time
Other Protection: Against excessive (heat,voltage,current) intense battery discharge
Operating Temperature: 0 ˚C.... + 40 ˚C
Proposed Temp. to extend battery life: 20 - 25 ˚C
Humidity: up to 95% ( non-condensing )
Audible Noise at 1 m: <50 dB
Protection Class: IP 20.
Interface
Interface (Communication ports): Standard RS232 port and optional RS485, Internal SNMP, Dry Contact Cards
Monitoring and Management Software: Standard.
Standarts
EN62040-1-1 (safety)
EN62040-2 (EMC)
EN62040-3(performance)
EN60950-1
Информираме Ви, че въпреки нашите усилия не можем да гарантираме, че публикуваната информация и снимки не съдържат неточности или грешки, които не могат да бъдат правно основание за претенции.
Input
Phase Configuration: 1Ph + N + PE (Hardwire)
Nominal Voltage: 220VAC/230VAC/240VAC
Minimum Voltage (at Half load): 160VAC
Minimum Voltage (at Full load): 180VAC
Maximum Voltage: 280VAC
Frequency: 45-65 Hz
Power Factor:0.99.
Output
Power Factor: 0,9
Phase Configuration: 1Ph + N + PE (Hardwire)
Nominal Voltage: 220VAC / 230VAC / 240VAC
Wave Form Pure: Sine Wave
Total Harmonic Distortion: at 100% linear load: <3% and at 100% non-linear load: <5%
Frequency: 50Hz or 60Hz (adjustable)
Frequency Tolerance(free running): ±0,1 %
Frequency Synchronized Range: ±1Hz, ±3Hz (selectable)
Static Voltage Regulation (0%-100% load): <1%
Crest Factor: 3
Transfer Time: 0sec
Overload: Up to 10min. @100%~120%, Up to 1min. @120%~150%, Transfer to bypass @ >150%
Total Efficiency: up to 90%
Greenmode efficiency: ≥97%
Outlets: External Socket Box (2 pcs SCHUKO, 4 pcs IEC C13 Outlets) Optional.
Display
LED + LCD Display: Line Mode, Backup Mode, ECO Mode, Bypass Supply, Battery Low, Battery Bad/Disconnect, Overload and Transferring with Interruption & UPS Fault
LCD display: Input Voltage, Input Frequency, Output Voltage, Output Current, Output Frequency, Load Percentage, Battery Voltage & Inner Temperature
Self Diagnostics: Upon Power-on, Front Panel Setting & Software Control, 24-hour routine checking.
Battery
Type: Maintenance-free lead acid batteries
Recharge Time: 4-6h up to 90%
Voltage: 240VDC
Quantity per string: 20 pcs 12V Batteries
Internal batteries: 20 pcs 12V 4.5Ah (internal battery version only)
Cold Start: Present .
Environment
Overload Protection: Bypass transfer time is calculated by simulating a temperature related model of a fuse
Short Circuit Protection: Acts as the ideal current source during the short circuit time
Other Protection: Against excessive (heat,voltage,current) intense battery discharge
Operating Temperature: 0 ˚C.... + 40 ˚C
Proposed Temp. to extend battery life: 20 - 25 ˚C
Humidity: up to 95% ( non-condensing )
Audible Noise at 1 m: <50 dB
Protection Class: IP 20.
Interface
Interface (Communication ports): Standard RS232 port and optional RS485, Internal SNMP, Dry Contact Cards
Monitoring and Management Software: Standard.
Standarts
EN62040-1-1 (safety)
EN62040-2 (EMC)
EN62040-3(performance)
EN60950-1
Запишете се за нашият Бюлетин
Запиши се за нашия онлайн бюлетин и научи първи за промоционални и нови продукти.
