- NETGEAR
Цена
6252.78 лв.
с ДДС
* ВЪНШЕН ДОСТАВЧИК
Безплатна Доставка
* - Стоката е в склад на официалния вносител на марката за България. Времето за доставка е обикновено от 1 до 3 работни дни. Възможно е към момента на завършване на поръчката, продукта да е вече изчерпан. В случай на изчерпана наличност ще се свържем с Вас
The NETGEAR M4300 Switch Series delivers L2/L3/L4 and IPv4/IPv6 rich services for enterprise edge and SMB aggregation deployments with unrivaled ease of use: 10 Gigabit models can seamlessly stack with 1 Gigabit models within the series. Non-stop forwarding virtual chassis architecture provides advanced High Availability (HA) with hitless failover, that is, distributed link aggregation allows for load balancing and virtually zero downtime. License-free L3 feature set includes static routing, policy-based routing, RIP, VRRP, OSpiv as well as Multicast PIM routing. The NETGEAR M4300 Switch Series is ready for the future, with Software-defined Network (SDN) and OpenFlow 1.3 enabled for your network.
Информираме Ви, че въпреки нашите усилия не можем да гарантираме, че публикуваната информация и снимки не съдържат неточности или грешки, които не могат да бъдат правно основание за претенции.
- Outstanding stacking
M4300 is flexible enough for mixed stacking between 10 Gigabit and 1 Gigabit models, using any 10G port with any media type (RJ45, SFP+, DAC cables) High-availability is another key differentiator for stackable solutions: in case of a master switch failure, NSF and hitless failover ensure the standby switch takes over while forwarding plane continues to forward traffic on the operational stack members without any service interruption. - Higher flexibility
Two half-width M4300 switches can be paired in a single rack space for redundant Top of Rack installations with Auto-iSCSI prioritization. 10 Gigabit ports are all independent and 1G backward compatible for progressive transition to 10G speeds. - Investment protection
Line-rate spine and leaf stacking topologies offer multiple possibilities in server rooms, in branch collapsed cores or at the edge of growing networks. Even if an organization is not ready for SDN, OpenFlow support offers future-ready design for maximum investment protection. - Secure services
With successive tiering, the Authentication Manager allows for authentication methods per port for a tiered authentication based on configured time-outs. - Industry standard management
Industry standard command line interface (CLI), functional NETGEAR web interface (GUI), SNMP, sFlow and RSPAN. Single-pane-of-glass NMS300 management platform with centralized firmware updates and mass-configuration support.
| General | |
|---|---|
| Device Type | Switch - 52 ports - L3 - Managed - stackable |
| Enclosure Type | Front to back airflow rack-mountable 1U |
| Subtype | 10 Gigabit Ethernet |
| Ports | 2 x 10/100/1000/10000 + 2 x 10 Gigabit SFP+ + 48 x 10/100/1000 (PoE+) |
| Power Over Ethernet (PoE) | PoE+ |
| PoE Budget | 480 W |
| Performance | Switching capacity: 176 Gbps |
| Max Units In A Stack | 8 |
| Routing Protocol | OSPF, RIP, IGMPv2, IGMP, VRRP, PIM-SM, PIM-DM, IGMPv3, MLDv2 |
| Remote Management Protocol | SNMP, Telnet, HTTPS, SSH, CLI |
| Authentication Method | RADIUS, TACACS+ |
| Features | ARP support, DiffServ support, IPv6 support, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Virtual Route Redundancy Protocol (VRRP) support, DHCP snooping, Access Control List (ACL) support, Quality of Service (QoS), MLD snooping, STP Root Guard, IPv4 support, LACP support, DHCP relay, Remote Switch Port Analyzer (RSPAN), Per-VLAN Rapid Spanning Tree (PVRST), dynamic ARP protection, IP source guard, Bridge protocol data unit (BPDU), LISP Across Subnet Mode (ASM), Source-Specific Multicast (SSM) |
| Compliant Standards | IEEE 802.3ad (LACP), IEEE 802.3az |
| Expansion / Connectivity | |
| Interfaces | 2 x 10GBase-T RJ-45 2 x 10GBase-X SFP+ 1 x management (Gigabit LAN) RJ-45 1 x serial (RS-232) RJ-45 1 x console (mini-USB) 1 x USB Type A 48 x 1000Base-T RJ-45 PoE+ |
| Power | |
| Power Device | Internal power supply |
| Installed Qty | 1 |
| Max Supported Qty | 2 |
| Power Provided | 550 Watt |
| Voltage Required | AC 120/230 V |
| Miscellaneous | |
| Localisation | Europe, Americas |
| Manufacturer Warranty | |
| Service & Support | Limited warranty - lifetime |
| Атрибут | Стойност |
|---|---|
| Device Type | Switch - 52 ports - L3 - Managed - stackable |
| Enclosure Type | Front to back airflow rack-mountable 1U |
| Subtype | 10 Gigabit Ethernet |
| Ports | 2 x 10/100/1000/10000 + 2 x 10 Gigabit SFP+ + 48 x 10/100/1000 (PoE+) |
| Performance | Switching capacity: 176 Gbps |
| Routing Protocol | OSPF, RIP, IGMPv2, IGMP, VRRP, PIM-SM, PIM-DM, IGMPv3, MLDv2 |
| Remote Management Protocol | SNMP, Telnet, HTTPS, SSH, CLI |
| Features | ARP support, DiffServ support, IPv6 support, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Virtual Route Redundancy Protocol (VRRP) support, DHCP snooping, Access Control List (ACL) support, Quality of Service (QoS), M |
| Compliant Standards | IEEE 802.3ad (LACP), IEEE 802.3az |
| Interfaces | 2 x 10GBase-T RJ-45 2 x 10GBase-X SFP+ 1 x management (Gigabit LAN) RJ-45 1 x serial (RS-232) RJ-45 1 x console (mini-USB) 1 x USB Type A 48 x 1000Base-T RJ-45 PoE+ |
| Power Device | Internal power supply |
| Installed Qty | 1 |
| Max Supported Qty | 2 |
| Power Provided | 550 Watt |
| Voltage Required | AC 120/230 V |
| Service & Support | Limited warranty - lifetime |
| Power Over Ethernet (PoE) | PoE+ |
| PoE Budget | 480 W |
| Authentication Method | RADIUS, TACACS+ |
| Localisation | Europe, Americas |
| Max Units In A Stack | 8 |
| Тегло | 0.00кг |
Запишете се за нашият Бюлетин
Запиши се за нашия онлайн бюлетин и научи първи за промоционални и нови продукти.
